iPECS UCP600 - 4 Appendix D: Station Admin Programming for eMG

iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
58
Table 4.4.2.2-1 Common Attributes
ATTRIBUTE
DESCRIPTION
RANGE
DEFAULT
Hot Desk Page
Identity
Page identity and page group and zone.
 Follow logged-in agent
 Hot desk phone
Refer to
description
Follow
Logged-in
Agent
DTMF across
the Page -
DTMF Receive
& ACK Allow
For Paged endpoint - Allow or do not allow the DTMF Receiving
and sending of DTMF ACK digit string.
OFF
ON
OFF
Call Coverage Attributes
Call Coverage
Mode
The Call Coverage feature permits an iPECS IP or LDP Phone
user to receive rings and answer calls for other stations.
OFF
ON
OFF
Call Coverage
Delay Ring
When a covered station rings, the {CALL COVERAGE} button
LED will flash at the covering station, and the station will receive a
ring (immediate or delayed by 0 to 15 ring cycles).
0~15
0
Call Coverage
On Busy
OFF: Call Coverage is implemented when a covered station is in
an idle state.
ON: Call Coverage is implemented when a covered station is in
an idle or busy state.
OFF
ON
ON
Call Coverage
Through Mobile
Extension
OFF: Call Coverage Ring is not delivered to Mobile Extension
ON: Call Coverage Ring is not delivered to Mobile Extension
OFF
ON
ON
Call Coverage
On Busy
Range
External Call Only: Call Coverage only for external calls when
the covered station is busy
External and Internal Call: Call Coverage both for external &
internal calls when the covered station is busy
Refer to
description
External
Call
Only
Call Coverage
Delay Ring
Method
by Originator: Call Coverage Delay is implemented by the
covered station’s “Call Cover Delay Ring” delay count.’
by Member: Call Coverage Delay is implemented by covering the
station’s “Call Cover Delay Ring” delay count.’
Refer to
description
by
Originator
Call Coverage
For Wakeup
Ring
OFF: Wakeup Ring to covered station is not covered
ON: Wakeup Ring to covered station is covered
OFF
ON
OFF
Call Coverage
Ring Type on
Member
Silence: No audible ring is presented, and the user must press
the flashing Call Coverage button to answer the call.
Normal Ring: Audible ring is presented, and the call can be
answered by simply lifting the handset or pressing the Speaker
button.
Mute ring is only supported in the LIP-8000E series.
Silence, Normal Ring, Muted(Continuous)-80XXE only,
Muted(One Burst)-80XXE only
Refer to
description
Normal
Ring