EasyManua.ls Logo

Lexmark X862de - Page 121

Lexmark X862de
851 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Diagnostic information 2-21
7500-432, -632, and -832
Go Back
Previous
Next
291.03
Scanner jam
Remove all
originals from
the scanner.
Sensor (ADF inverter) off jam After the sensor (ADF registration) turned off during
the Read operation of the last document, the sensor
(ADF inverter) did not turn off within the specified
time. (Simplex mode)
After the ADF registration motor turned on (CCW)
during the Read operation, the sensor (ADF
inverter) did not turn off within the specified time.
(Simplex mode)
After the sensor (ADF registration) turned off during
the Read operation, the sensor (ADF inverter) did
not turn off within the specified time. (Duplex mode)
Go to “291.03 Sensor (ADF inverter) off jam” on
page 2-109.
294.00
Scanner jam
Remove all
originals from
the scanner.
Sensor (ADF inverter) static
jam
The system detected that the sensor (ADF inverter)
is on.
Go to “294.00 Sensor (ADF inverter) static jam”
on page 2-112.
294.01
Scanner jam
Remove all
originals from
the scanner.
Sensor (ADF pre-registration)
on jam side 2
After the Invert operation started, the ADF
registration motor turned on (CW)) at Invert, the
sensor (ADF pre-registration) did not turn on within
the specified time.
Go to “294.01 Sensor (ADF pre-registration) on
jam side 2” on page 2-113.
294.02
Scanner jam
Remove all
originals from
the scanner.
Sensor (ADF pre-registration)
off jam on inverting
After the ADF registration motor turned on at Invert,
the sensor (ADF pre-registration) did not turn off
within the specified time.
Go to “294.02 Sensor (ADF pre-registration) off
jam on inverting” on page 2-115.
295.00
Scanner jam
Remove all
originals from
the scanner.
Size mismatch Jam (Mix-
size)
In Mixed Size Originals, it was detected that the
Fast Scan Direction size was different from the
width of the document guide.
Go to “295.00 Size mismatch jam (mix-size)” on
page 2-117.
295.01
Scanner jam
Remove all
originals from
the scanner.
Size mismatch Jam (No Mix-
size)
The second and subsequent documents are
different size from the first document.
Go to “295.01 Size mismatch jam (no mix-size)”
on page 2-119.
295.02
Scanner jam
Remove all
originals from
the scanner.
Invalid Combine Size Jam An invalid document size combination was
detected.
Go to “295.02 Invalid combine size jam” on
page 2-120.
295.03
Scanner jam
Remove all
originals from
the scanner.
Too Short Size Jam The system detected a document with a length
shorter than 115mm in the Slow Scan Direction.
Go to “295.03 Too short size jam” on page 2-121.
Error code or
message
Error contents Description/Action

Table of Contents

Related product manuals