Lexmark X862de - Page 120

2-20 MFP Service Manual
7500-432, -632, and -832
Go Back
Previous
Next
290.14
Scanner jam
Remove all
originals from
the scanner.
Sensor (ADF inverter) on jam
(Inverting)
After the sensor (ADF registration) turned on during
the Invert operation, the sensor (ADF inverter) did
not turn on within the specified time.
Go to “290.14 Sensor (ADF inverter) on jam
(Inverting)” on page 2-97.
290.15
Scanner jam
Remove all
originals from
the scanner.
Sensor (ADF registration) off
jam (inverting)
After the sensor (ADF pre-registration) turned off at
Invert, the sensor (ADF registration) did not turn off
within the specified time.
Go to “290.15 Sensor (ADF registration) off jam
(inverting)” on page 2-99.
290.21
Scanner jam
Remove all
originals from
the scanner.
Sensor (ADF width APS 1)
static jam
The system detected that the sensor (ADF width
APS 1) is on.
Go to “290.21 Sensor (ADF width APS 1) static
jam” on page 2-102.
290.22
Scanner jam
Remove all
originals from
the scanner.
Sensor (ADF width APS 2)
static jam
The system detected that the sensor (ADF width
APS 2) is on.
Go to “290.22 Sensor (ADF width APS 2) static
jam” on page 2-103.
290.23
Scanner jam
Remove all
originals from
the scanner.
Sensor (ADF width APS 3)
static jam
The system detected that the sensor (ADF width
APS 3) is on.
Go to “290.23 Sensor (ADF width APS 3) static
jam” on page 2-104.
291.00
Scanner jam
Remove all
originals from
the scanner.
Sensor (ADF registration)
static jam
The system detected that the sensor (ADF
registration) is on.
Go to “291.00 Sensor (ADF registration) static
jam” on page 2-104.
291.01
Scanner jam
Remove all
originals from
the scanner.
Sensor (ADF inverter) off jam
(Inverting)
After the sensor (ADF registration) turned off during
the Invert operation of the last document, the sensor
(ADF inverter) did not turn off within the specified
time.
After the ADF registration motor turned on (CCW)
during Invert operation, the sensor (ADF inverter)
did not turn off within the specified time.
Go to “291.01 Sensor (ADF inverter) off jam
(inverting)” on page 2-105.
291.02
Scanner jam
Remove all
originals from
the scanner.
Sensor (ADF inverter) on jam
2
After the Read Speed Control operation started, the
ADF registration motor turned on (CCW)), the
sensor (ADF inverter) did not turn on within the
specified time.
Go to “291.02 Sensor (ADF inverter) on jam 2” on
page 2-107.
Error code or
message
Error contents Description/Action