Mitel 430 - Routing Functions for Outgoing Calls

Routing elements
143
System functions and features as of R4.1
syd-0570/1.2 – R4.1 – 08.2016
Several terminals can be allocated to an internal user. A call to this user is routed to all
the terminals allocated to him or only to a number of them (see "One number concept
and personal call routing", page 331).
5. 8. 2 Routing Functions for Outgoing Calls
The following outgoing routing settings are grouped together in the user configuration:
• Classes of service:
– Exchange access authorization
– Priority exchange allocation (see page 203)
– Digit barring, external (see page 192
)
– Digit barring, internal (see page 167)
– Partial rerouting (see page 231)
– Least Cost Routing (see page 207
)
• Outgoing call number for PISN users or integrated mobile/external users
• Route allocation
• Forcing the route if the LCR function is activated (see page 220
)
Rights
Enable or restrict authorizations to make outgoing phone calls to the public network
from an allocated terminal. The following are excluded from the barring:
• Dialling abbreviated dialling numbers
• Dialling the emergency number
• Dialling PISN user numbers
• Choosing integrated mobile/external user numbers
Call Number of the PISN User for Outgoing Calls
If a PISN user is in a virtual network, his external (DDI) number will be listed here with-
out the exchange access prefix. If a PISN user is in a fixed network, a number is not
usually entered here (see "Call to the private Leased-Line Network", page 205
).
For a more detailed description of which users of a different PINX can be entered as
PISN users, see "Shared Numbering Plan", page 69
.