Features
458
System functions and features as of R4.1
syd-0570/1.2 – R4.1 – 08.2016
System configuration
Tab. 290 User group: System configuration
Reference to Other Features
"Coded ringing on general bell", page 441
"Call Forwarding Unconditional (CFU)", page 333
9. 7. 10 Home alone
If calls to a user group can only be answered by one user, that user can activate the
Home Alone feature on the user group.
If the user is then making a call, all other internal or external callers to the user group
will obtain the congestion tone.
If the user in the user group is assigned several terminals, the parameter Busy on busy
must be activated for that user.
Detailed Description
Tab. 291 Home Alone
• A UG with activated Home Alone is busy if at least one of the UG’s users is in an
outside call or an internal call.
• If a user is in several line groups with “Home Alone” activated and if he is in a call,
callers to one of the UGs will obtain “busy tone”.
Functions in prefix dialling
Tab. 292 User group: Functions
Parameter Remarks
User group / UG configuration in the call routing
Connected user groups / User configuration
Operating sequence / signalling on the terminal Scope
• The user obtains an acknowledgement tone in each case when activat-
ing/deactivating Home Alone.
• If the function is configured on a key with LED display, the status will be dis-
played. The LED lights up when the feature is activated.
Functions Function codes
Activate Home Alone *49 <UG No.>
Deactivate Home Alone #49 <UG No.>
To Next Page
Loading...
