Mitel 430 - Network Printer and Mitel 400 Print Spooler; Function Codes in Prefix Dialling

Features
481
System functions and features as of R4.1
syd-0570/1.2 – R4.1 – 08.2016
9. 9. 3 Network printer and Mitel 400 Print Spooler
The network printer is used to print out the call charge invoices via the MiVoice 5380 /
5380 IP reception phone. It is activated via the Mitel 400 Print Spooler. Install the print
spooler on a computer with maximum availability within your IP network, and on which
the desired printer y is set up.
The print spooler provides three ports, allowing you to activate up to three printers in-
dependently of one another. It processes both print orders for TXT and HTML tem-
plates. For TXT orders you can also specify format properties such as page borders
and fonts.
You can download the Mitel 400 Print Spooler from the Mitel Software Download
Server or source it from your distribution partner.
As an alternative to the Mitel 400 Print Spooler, you can also connect a serial printer di-
rectly to the communication server via an IP adapter and a switch for small businesses
without IT infrastructure. For example: Epson thermal line printers combined with IP
adapters manufactured by AK-Nord, Germany, are suitable for this purpose. The serial
printer must support the UTF-8 or WPC1252 codepage.
9. 9. 4 Function codes in prefix dialling
Room cleaning status
The maintenance staff can use a function code to change the cleaning status of a spe-
cific room. There are 3 states: Not cleaned, Cleaned and Checked.
The function codes can be executed on the room phone or any other internal phone.
Tab. 320 Room cleaning status: Functions
Maintenance notes
The maintenance staff can use a function code to leave maintenance notices for a spe-
cific room. These maintenance notices and the relevant maintenance codes are listed
in a table in WebAdmin under Maintenance codes.
Once the maintenance work has been completed, Technical Services for example can
delete a room's maintenance notices.
The function codes can be executed on the room phone or any other internal phone.
Functions Function codes
Enter cleaning status *52 x #
Enter cleaning status on another internal phone *52 x * <Room No.> #
x = cleaning status: 1 = Not cleaned, 2 = Cleaned, 3 = Checked