Call logging (CL)
280
System functions and features as of R4.1
syd-0570/1.2 – R4.1 – 08.2016
• Separate protocols:
ICL and OCL protocols can be configured independently of each other.
• Memory overflow
• Ambivalence with transfer traffic:
If external calls are transferred or rerouted to an external destination and then an-
swered there, 2 protocol lines will be generated (if both OCL and ICL are enabled).
• Two-company system:
ICL does not support separate logging according to company.
8. 5 Call data output
The ICL, OCL and ICC data is output on printers or other output devices via the Ether-
net interface. It is possible to configure which data is output on which of the available
interfaces. Up to 4 output devices can be connected at the same time.
Fig. 154 Output concept
See also:
The call data can also be accepted and processed further by OIP. For more details please refer
to the "Mitel Open Interfaces Platform" system manual.
FXS / FXO
Ethernet
1...4
Communication server
Printer
Service
output
Event output
CL output
ICC
output
Output types
BRI-S / BRI-T
To Next Page
Loading...
