Features
495
System functions and features as of R4.1
syd-0570/1.2 – R4.1 – 08.2016
See also:
The operation and configuration possibilities for alarming the Office 160Safeguard/ATEX and
the Mitel 630 DECT such as alarm delay, detection time and alarm signalling are described in
detail in the relevant user’s guides.
9. 11. 3. 5 Functions with Mitel Alarm Server
If an Mitel Alarm Server is integrated into your communications system, the following
additional features will be available on your phone.
Direct response
Note:
This function is used mainly by nursing staff in the health sector.
Situation:
Patient A requires assistance and presses alarm button A1 by his bedside. The Mitel
Alarm Server sends an acoustic and visual alarm message (e.g. "Alarm Room 20") to
the phone of the carer in charge, e.g. nurse B. Nurse B can then use the Direct re-
sponse function to set up a call connection with the patient. The patient's phone auto-
matically answers the call and switches to hands-free mode so the nurse is able to find
out how the patient is and take the appropriate measures.
Fig. 253 Direct response
Mitel Alarm
Server
A2
A1
B
A
Alarm o
Alarm on
Communication
server
To Next Page
Loading...
