Mitel 430 - Answer General Bell

Features
442
System functions and features as of R4.1
syd-0570/1.2 – R4.1 – 08.2016
System configuration
Tab. 270 Coded ringing on the general bell: System configuration
9. 7. 1. 1 Answer general bell
A call can be signalled on the general bell (ringing signal) and be answered by any
user B who hears it.
Fig. 237 Answer ringing signal on general bell
Detailed Description
General bell is activated via user group (UG) or via proxy.
If other calls are routed to the general bell, they are placed in a queue (max. 10 en-
tries).
Tip:
General bell in the UG of the operator console with delay:
If the attendant is absent for a short time (or is overloaded), the general bell is activated after
the delay time. Employees who hear the ringing tone can then answer the call.
Function in prefix dialling
Tab. 271 Answer general call: Function
System configuration
Tab. 272 Answer general call: System configuration
Parameter Remarks
Coded call via general bell
1)
1)
These two settings overwrite each other.
Configuration services: The fie coded call IDs can each be assigned a user.
Coded call
1)
User configuration: Assigning one of the five codec call IDs.
Function Function code
Answer ringing signal on general bell *83
Parameter Remarks
General bell User group configuration
General bell delay User group configuration
General bell for substitution General system settings
KD]DD[[E

%