Mitel 430 - Enquiry Call with Return to Initial Call

Features
357
System functions and features as of R4.1
syd-0570/1.2 – R4.1 – 08.2016
System configuration
Tab. 156 Hold (enquiry call): System configuration
Reference to Other Features
"Brokering (switching back and forth between two calls)", page 358
"Enquiry call with return to initial call", page 357
"Three-party conference from an enquiry call", page 362
"Call transfer (switching)", page 366
"Recall", page 371
"Call acceptance", page 372
9. 5. 3 Enquiry call with return to initial call
A user (B) can initiate an inquiry call connection during a call (A–B) and as a result hold
a short conversation with another call partner (C), without interrupting the first connec-
tion. The original connection is restored once the enquiry call is completed.
Fig. 198 Enquiry
Detailed Description
Tab. 157 Enquiry call with return to initial call
Suffix dialling functions
Set up enquiry call: see "Hold (enquiry call)", page 356
Parameter Remarks
Hold in the exchange • Trunk group configuration
• Local feature does not require any setting
Music on hold see "Music on hold", page 353
End point Operating sequence / signalling on terminal Scope
A Music on hold is played to user A, who is on hold
1)
1)
With hold in the public exchange, the signalling depends on the network provider.
Possible interfaces:
internal, external, PISN
C Possible interfaces:
internal, external, PISN
$ %
&
KD]DD[[D