Features
344
System functions and features as of R4.1
syd-0570/1.2 – R4.1 – 08.2016
Functions during the ringing phase
Tab. 139 Call Deflection: Functions
System configuration
No settings
Reference to Other Features
"Call Forwarding Unconditional (CFU)", page 333
"Call Forwarding on No Reply (CFNR)", page 340
"Call waiting", page 388
"Reject call", page 344
9. 4. 5 Reject call
Calls for B are rejected during the ringing phase. This immediately clears down the call
set-up and therefore the ringing at B. User A obtains the busy tone.
Fig. 191 Rejecting a call during the ringing phase
Detailed Description
Tab. 140 Reject call
Other properties:
• If the called user is busy and the calling user activates Call waiting, the call can also
be rejected.
• A configured CFNR, a CFB or an entry in the CDE configuration under CDE if no
answer or CDE if busy are not executed after a call has been rejected.
Functions System phones (without Office 10)
Deflecting a call during the ringing phase (Call
Deflection)
1.
2.The call number is entered via the keypad,
using dialling by name, the call list, etc.
3.
End point Operating sequence / signalling on the terminal Scope
B The activation of the feature is not confirmed. • System phones with display via the Fox-
key/Softkeys
• ISDN terminals that support the feature. (The
response after rejection varies from one man-
ufacturer to the next)
To Next Page
Loading...
