Features
463
System functions and features as of R4.1
syd-0570/1.2 – R4.1 – 08.2016
Mitel Advanced Intelligent Network:
In an AIN control outputs can be used as a mix of FXS interfaces and ODAB options cards
(Mitel 415/430 only). An authorized user can switch all the control outputs, regardless of where
they are located. The call numbers of all control outputs of an AIN are defined in the numbering
plan.
Reference to Other Features
"Open door", page 465
9. 7. 13 Door function
There are two ways of connecting a door intercom (TFE):
• Using an options card ODAB (only Mitel 415/430)
• Via an analogue terminal port FXS
In a connection using an options card, the equipment or installation is controlled via re-
lays and a control input on the options card.
In a connection using an analogue terminal port the TFE must be capable of sending
and receiving DTMF signals as the control is effected acoustically via a speech path.
On the analogue terminal port the parameter FXS mode must be configured to 2-
wire door.
The following functions are available with both connection variants:
• Door bell triggers a call
• Open door
• Dial door intercom
9. 7. 13. 1 Door bell
Depending on the system configuration, pressing the door bell triggers a call to any in-
ternal destination B.
To Next Page
Loading...
