Features
384
System functions and features as of R4.1
syd-0570/1.2 – R4.1 – 08.2016
Functions for listening to voice messages
Besides the possibility of listening to received voice messages either from the list of
unanswered calls, the voice-mail incoming list or by calling the voice mail system, the
following function codes are available:
Tab. 189 Voice mail: Functions for listening to voice messages
9. 6. 1. 11 Suffix dialling functions
A voice mailbox can also be operated from another internal telephone or an external
telephone (DTMF / Keypad protocol) using suffix dialling (DTMF) (Remote retrieval).
The only requirement is that calls are forwarded to the voice mailbox and that the rele-
vant PIN is known and does not correspond to the default value "0000".
The Quick User's Guide below illustrates the sequence allowing a user to operate his
mailbox from a third-party internal or external phone. If required, the whole page can
be printed out and the Quick User's Guide can then be cut out. Once folded or glued
together it provides a practical guide in credit card format.
1)
"[ ]" the digits inside the brackets are optional
"nn" stands for the node number. If no node number is indicated, the node used is that of the terminal with
which the functions are carried out. With IP system phones this is always the Master; with cordless phones it
is the node at which the phone is currently located.
Functions Function codes
Listen to voice messages with audio guide *#94
Listen to voice messages without audio guide *#916 #
To Next Page
Loading...
