Mitel 430 - DECT Follow Me in a Network with 2, 3 or 4 Systems

Features
350
System functions and features as of R4.1
syd-0570/1.2 – R4.1 – 08.2016
9. 4. 9. 1 DECT Follow Me in a Network with 2, 3 or 4 Sys-
tems
This configuration can be used to find a cordless phone in up to 4 systems without de-
lay. The phone has to be logged on in all 4 systems and the system search mode be
set to Automatic on the phone.
Detailed Description:
The cordless phone is logged on under System A on its own communication server
and under B, C and D on the other PINXs. On each communication server a number is
configured under the corresponding user ( DECT Follow me call number) which is di-
alled automatically as soon as the phone registers with the system. On a PINX this ac-
tivates call forwarding from its own communication server to the communication server
on which the cordless phone has just registered. If the phone then registers on its own
communication server, the previously activated call forwarding is deactivated.
Other properties:
• Twin Mode is possible on one’s own communication server
• Not possible in virtual networks
• Possible only with Office 135 and Office 160
Notes:
–If the DECT Follow me call number cannot be dialled when the handset registers with a
system, because the QSIG link is either interrupted or overloaded, the phone will be una-
ble to register. It will continue trying until registration is successful.
– With Office 135 and Office 160 "Long-Click 1" switches over only temporarily to manual
search of the next system. What is relevant is the setting in the phone's configuration
menu. This prevents accidentally switching the phone over from Automatic to Manual
system search and therefore unintentionally deactivating DECT Follow Me.
The following configuration option can be used as an alternative to DECT Follow me in
a network with only 2 systems:
CFU if Unobtainable in a Network with 2 Systems
If most of the phone calls are made in the same system, a destination for unobtainable
can be used for the user to find the cordless phone on the second system:
• The phone has the same internal number in both systems.
• With the first call the diversion takes approx. 13 seconds. The diversion is immedi-
ate as of the second call.
• Twin Mode is possible on one’s own communication server
• Also possible in virtual networks