Call routing
188
System functions and features as of R4.1
syd-0570/1.2 – R4.1 – 08.2016
6. 3. 7 Emergency Routing
1)
6. 3. 7. 1 Routing if the Call Destination is busy
If the call destination is busy, an incoming call will be handled according to the type of
destination. Busy call destinations may be:
• an individual, busy user
• a busy user group
• a busy KT line
• a user with a stored message
Call destination: Individual, busy user
Call waiting is allowed, but is rejected
Tab. 34 Call waiting is allowed, but is rejected
Call waiting is not allowed
Tab. 35 In the call distribution "CDE if busy" is set on Capolinea
Note:
If a fax machine is connected to an internal terminal interface, disable Call waiting for that user.
1)For Italy only
Response if the Capolinea destination ...
Origin of the call ...is defined ...is not defined
Call from the public ISDN network Call is routed to the defined Capo-
linea destination
Call is cleared down, caller obtains
busy tone
Call from the public analogue net-
work
Call is routed to the defined Capo-
linea destination
Wait until free, caller obtains ring-
back tone
Response if the Capolinea destination ...
Origin of the call ...is defined ...is not defined
Call from the public ISDN network Call is routed to the defined Capo-
linea destination
Call is cleared down, caller obtains
busy tone
Call from the public analogue net-
work
Call is routed to the defined Capo-
linea destination
Wait until free, caller obtains ring-
back tone
To Next Page
Loading...
