Features
317
System functions and features as of R4.1
syd-0570/1.2 – R4.1 – 08.2016
Prefix and suffix dialling Function Codes
*/# function codes are used to control features. A function can be triggered under three
different sets of conditions:
• In prefix dialling: dialling takes place before any connection is made.
• In suffix dialling: dialling takes place during a connection or call.
• During the ringing phase: dialling takes place during the ringing phase of an incom-
ing call
Depending on the nature of the feature a function is triggered either in prefix dialling, in
suffix dialling, during the ringing phase or in several call states.
On system phones, user-related features are activated or deactivated using the Fox-
key or Softkeys, under which a variety of functions can be stored. Equipment-specific
settings can be found in the relevant user's guide for the system phones concerned.
System configuration
Designation of the parameters concerned in the system configuration and their set-
tings.
Reference to Other Features
List of associated or linked features.
9. 1. 2 Information about the system phones
The term system phone includes the following phones:
• MiVoice 5300/MiVoice 5300 IP series corded phones
• Cordless DECT phones of the Mitel 600 DECT family
• IP Softphone MiVoice 2380 IP
• Operator phone MiVoice 1560 PC Operator
• Dialog 4200 phones (can be connected to Mitel 470 only)
• Older corded Office phones (Office 10/25/35/45)
• Older cordless Office DECT phones (Office 135/135pro,
Office 160pro/Safeguard/ATEX)
Unless otherwise specified, information on the system phones also includes IP, ip, pro
and other variants.
Example: MiVoice 5370 also contains MiVoice 5370 IP.
To Next Page
Loading...
