Features
477
System functions and features as of R4.1
syd-0570/1.2 – R4.1 – 08.2016
Tab. 318 Additional time-controlled functions
Special restart function
In addition to the control using */# function codes a time-controlled restart of the sys-
tem is also possible. The "time dependant pbx reset" character sequence is entered to
obtain this function. After a reset the entry is automatically deleted. A reset using a
time-controlled function is clearly identified by the error ID 08625 in the crash log.
Mitel Advanced Intelligent Network:
In an AIN the execution of a time-controlled function is always determined by the Master’s time.
A time zone shift configured for a node is not automatically taken into account.
9. 9 Hospitality/Hotel
The MiVoice Office 400 communication server offers you convenient configuration
tools for implementing an hospitality and hotel solution, operation possibilities and in-
terfaces:
• User-friendly solution configurable using WebAdmin.
• Functions operated using the MiVoice 5380 / 5380 IP reception phone or the web-
based Mitel 400 Hospitality Manager application.
• Connection to a Property Management System (PMS) via the communication
server's Ethernet interface. The commercially available FIAS protocol is provided for
this purpose.
Feature Activate Reset
Set up the system time *57 hh mm
Set up the system date *58 dd mm yyyy
Operate switch groups *85 <Switch group.>
<Pos.>
Actuate door opener *74 <No. of the door inter-
com system>
Switch control outputs *74 <Call number
1)
>
1)
call number assigned to this control output in the numbering plan
#74 <Call number
1)
>
Home Alone *49 UG No. #49 UG No.
Activate / deactivate welcome announcement of the
announcement service
*931 <No. of the welcome
announcement>
#931 <No. of the welcome
announcement>
Enable/bar a one-off remote access *754 #754
Enable/bar a permanent remote access *753 #753
To Next Page
Loading...
