Features
410
System functions and features as of R4.1
syd-0570/1.2 – R4.1 – 08.2016
9. 6. 15 Leave message
If user B is absent or unobtainable for longer period of time, he can leave a message in
the system for internal users. If user A now calls user B from a system phone with dis-
play, the system will send to A’s display the text left by B.
Fig. 222 Leave message
Detailed Description
Tab. 224 Leave message
If the conditions for user A are not met (A is not an internal user or does not have an al-
phanumerical display):
The call is routed to the number of the preconfigured call forwarding unconditional. If
this number is not configured, the call is routed in the normal way to the user who left
the message. The call is stored in the list of callers.
Message:
• The message is either user definable or can be selected from a choice of 16 prede-
fined text messages (see "Text messages", page 411
).
• The text messages can be configured to the customer's special requirements.
• The text messages can be activated with or without additional parameters. Their
length is limited to 160 characters.
Note:
Activating a call forwarding deletes the message.
End point Operating sequence / signalling on the terminal Scope
A Possible interfaces:
internal only
Requirement:
The user is equipped with a system phone with
alphanumerical display.
B The user obtains the acknowledgement tone every
time he activates / deactivates the feature.
To Next Page
Loading...
