Features
443
System functions and features as of R4.1
syd-0570/1.2 – R4.1 – 08.2016
9. 7. 1. 2 General bell on analogue terminal interface FXS
The general bell is connected to an analogue terminal interface FXS. Precisely one
FXS interface per communication server can be configured for this purpose. Any exist-
ing allocation to a user is then automatically deleted.
Once the connection is made, no calls can be made or received via the port.
Mitel Advanced Intelligent Network:
In an AIN a general bell can be configured per node.
System configuration
Tab. 273 Analogue port for general bell: System configuration
Reference to Other Features
"Call Forwarding Unconditional (CFU)", page 333
"Call Forwarding on No Reply (CFNR)", page 340
"User group: Logging in and logging out", page 457
9. 7. 2 Announcement service (announcement prior to
answering)
The announcement service is for incoming external calls, but if required it can also be
used for internal calls via a call distribution element. If a call from A is not answered
within a preset delay time by internal user B (who is either free or for whom call waiting
is enabled), the caller will hear a welcome announcement (provided the call has not
been rerouted to the alternative destination (Capolinea)
1)
beforehand). Once the an-
nouncement has been made, the caller obtains either the ring-back tone, music, a
pause or another announcement is made. This can be repeatedly endlessly, with the
possibility of playing back up to 20 different Wave files. A succession consisting of
wave life, pause signal and pause duration is referred to as a sequence.
Fig. 238 Announcement service
As long as caller A is connected with announcement service, user B’s terminal contin-
ues to ring. If B answers, the connection is put through immediately.
Parameter Remarks
FXS mode Analogue interface configuration:
Configure parameter on General bell.
1) Only for Italy
$
%
KD]DD[[D
To Next Page
Loading...
