Product and Safety Information
18
System functions and features as of R4.1
syd-0570/1.2 – R4.1 – 08.2016
1. 5 About this document
This document describes the system functions and features of communication servers
of the MiVoice Office 400 series. The expansion stages, system capacity, installation,
configuration, the operation and maintenance, the technical data, the DECT planning,
and the possibilities for networking several systems into a private network (PISN) or an
Mitel Advanced Intelligent Network (AIN) are not part of this Manual. They are de-
scribed in separate documents.
The document is intended for planners, installers and system managers of phone sys-
tems. Basic knowledge of telephony, especially of ISDN and IP technology, is needed
to understand the content.
The system manual is available in Acrobat Reader format and can be printed out if
necessary. Navigation in PDF format is based on the bookmarks, table of contents,
cross references and index. All these navigation aids are linked, i.e. a mouse click
takes you directly to the corresponding places in the Manual. We have also ensured
that the page numbering in the PDF navigation corresponds to the page numbering of
the Manual, making it much easier to jump to a particular page.
Referenced menu entries and parameters appearing on terminal displays or on the
user interfaces of the configuration tools are highlighted in italics and in colour for a
clearer orientation.
Document information
• Document number: syd-0570
• Document version: 1.2
• Valid as of / based on: R4.1 / R4.1
• © 08.2016 Mitel Schweiz AG
• In PDF viewer, click on this link to download the latest version of this document:
https://pbxweb.aastra.com/doc_finder/DocFinder/syd-0570_en.pdf?get&DNR=syd-0570
To Next Page
Loading...
