Features
342
System functions and features as of R4.1
syd-0570/1.2 – R4.1 – 08.2016
Functions in prefix dialling
Tab. 136 Call Forwarding on No Reply: Functions
System configuration
Tab. 137 Call Forwarding on No Reply: System configuration
Reference to Other Features
"Call Forwarding Unconditional (CFU)", page 333
"Deflecting a call during the ringing phase (CD)", page 342
9. 4. 4 Deflecting a call during the ringing phase (CD)
Calls intended for B are deflected to destination C during the ringing phase. (CD: Call
Deflection). In such cases the call is not forwarded automatically but manually by user
B. Unlike CFNR the call is signalled only at destination C after it has been forwarded.
Functions Function codes
Activate CFNR to user *61 <Destination No.>
Clear CFNR to user: #61
Activate CFNR to user last configured *61 #
Clear CFNR to user last configured #61
Activate preconfigured CFNR *62
Clear preconfigured CFNR #62
Activate CFNR to general bell (coded ringing) *68
Clear CFNR to general bell (coded ringing) #68
Protect (own set) against CFNR *02
Allow CFNR (to own set) #02
Parameter Remarks
Call forwarding transfer delay Setting valid throughout the system
Preconfigured call forwarding on no reply (CFNR) User configuration
Call forwarding type User configuration
Call forwarding destination User configuration
Execute call forwarding on no reply even if call destination is
busy
User's permission set
Immediate call forwarding on no reply Setting valid throughout the system
Priority over activated CFNR User configuration
Suppress immediate CFNR PISN user configuration
Partial Rerouting (PARE) User's permission set
Partial Rerouting (PARE) Trunk group configuration
To Next Page
Loading...
