Mitel 430 - Category for emergency number

Numbering plan
60
System functions and features as of R4.1
syd-0570/1.2 – R4.1 – 08.2016
Name
The name is used:
• To dial by entering the name rather than the call number (dialling by name).
• To display the name on the user’s own system phone when the CLIP number of an
incoming call matches the number stored under abbreviated dialling (see "Replicat-
ing the Name Display in the Communication Server", page 77).
Digit Barrings and Exchange Access Rights
When an external destination is dialled via an abbreviated dialling number the number
stored bypasses the digit barring and the exchange access authorization.
When an external destination is dialled using dialling by name via abbreviated dialling,
only the exchange access rights are bypassed (more on digit barrings and exchange
access rights see "Digit barring", page 192
and "Exchange access authorization",
page 203).
3. 2. 4 Category for emergency number
A total of 10 emergency numbers can be created in the numbering plan. The emer-
gency numbers are used to quickly dial an emergency number destination.
All emergency call numbers dial global emergency destination 1. In the Emergency
destination view ( =9r) configure 1 switch group and 3 destination numbers for emer-
gency call destination 1. When an emergency call number is dialled one of the three
destination numbers is dialled based on the switch position of the assigned switch
group.
Notes:
– When an external destination is dialled via the emergency number the digit barring and the
exchange access authorisations are bypassed.
– 49 emergency destinations can be defined in addition to the global emergency destination.
They are meant for individual assignment to terminals. If a terminal is assigned such an
emergency destination, one of the destination numbers of this emergency destination is
dialled while dialling an emergency call number, depending on the switch position of the
assigned switch group. Therefore, the emergency destination of the terminal has priority
over the global emergency destination.
Mitel Advanced Intelligent Network:
In an AIN the nodes can be located in different countries, which means it makes sense to enter
in the numbering plan the emergency number normally used in each country. Depending on the
assigned emergency destination and the switch position of the configured switch group the cor-
responding destination number is then dialled whenever the emergency number is dialled. The
assignment of the emergency number destination is configured for each node.