Features
372
System functions and features as of R4.1
syd-0570/1.2 – R4.1 – 08.2016
If the transferred user has
• activated CFU or CFB, the recall time used is the one defined at the CFU destina-
tion.
• activated CFNR or Default CF if no answer, the switched user’s own recall time is
used.
• forwarded the call during the ringing phase (Call Deflection), the switched user’s
own recall time is used.
A recall is also triggered if a parked call is not retrieved within the monitored parking
time.
System configuration
Tab. 182 Recall: System configuration
Note:
If the value of the Internal ringing duration parameter is smaller than the corresponding recall
time, the call connection is cleared down and the recall is not carried out. In the case of forward-
ing with a time delay (e.g. Call Deflection or Default CF if no answer), the timer is restarted (see
also "Internal ringing duration", page 167).
9. 5. 8 Call acceptance
An internal user C can accept a connection with user A after being contacted in an en-
quiry call by user B, who was connected with A.
Fig. 207 Call acceptance
Parameter Remarks
Recall time Setting valid throughout the system
Recall time for virtual user Setting valid throughout the system
Recall time User configuration
$
%
KD]DD[[D
&
To Next Page
Loading...
