EasyManua.ls Logo

Mitel 430 - Internal Digit Barring; Internal Ringing Duration

Mitel 430
502 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Call routing
167
System functions and features as of R4.1
syd-0570/1.2 – R4.1 – 08.2016
Tab. 24 Examples with placeholders
Please note:
Either "x" or "X" can be used as a placeholder (stands for digits 0...9)
The entry under Internal call number may not contain placeholders only ("xxxx" is
not permitted)
Placeholders are permitted on at the end of an entry ("4x4" is not permitted)
External call number and Internal call number must always contain the same num-
ber of placeholders.
When the table is searched, the call numbers without placeholders are compared
first, then the call numbers with 1 placeholder and so on. This makes it possible to
define certain exceptions concerning number ranges.
6. 2. 3 Internal digit Barring
There are several digit barring options available for internal traffic. The same rules ap-
ply as for external digit barring facilities (see "Digit barring", page 192).
6. 2. 4 Internal ringing duration
An internal user's internal ringing duration can be defined with the parameter Inter-
nal ringing duration. The call connection is disconnected once that time has elapsed.
The timer is restarted if the call is forwarded after a set time (e.g. with Call Deflection or
Default call forwarding if no answer).
Note:
With calls from the PSTN the connection is cleared down by the network provider, usually after
approx. 2 minutes.
If the external call is answered by the announcement service, the call is considered as switched
through for the PSTN. As long as the caller is switched to announcement service, a ringing tone
is generated internally. The configured internal ringing time is therefore also a decisive criterion
for clearing down the connection.
External call number Internal call number Result
+41 32 655 386x 386x 10 external call numbers are routed to 10 internal
destinations.
+41 32 655 44xx 44xx 100 external call numbers are routed to 100 internal
destinations.
+41 32,655 55xx 21xx The 100 external call numbers with the end digits
5500...5599 are routed to the 100 internal call num-
bers 2100...2199.

Table of Contents

Other manuals for Mitel 430

Related product manuals