Features
467
System functions and features as of R4.1
syd-0570/1.2 – R4.1 – 08.2016
Functions / system configuration for connection via analogue port
Dial the door intercom:
Dialling of the call number of the user who is assigned an analogue terminal to whose
port the door intercom system is connected.
System configuration
Tab. 309 Door intercom: System configuration
Reference to Other Features
"Door bell", page 463
"Open door", page 465
9. 7. 14 System time and system date
The system time and system date are used as information in many areas, for instance
for the display on system phones, for call logging, for event messages, etc. The system
time and system date are also required for the appointment reminder call and the time-
controlled triggering of functions.
Functions in prefix dialling
Tab. 310 System time and system date: Functions
The system time and system date can also be remote controlled from the outside.
The System time and the System date can also be set in WebAdmin. The infor-
mation is entered manually or taken from the PC.
Note:
By default, a user is assigned permission set 1 with internal digit barring 5. Function codes *57
and *58 are barred in the internal digit barring by default.
System time zone
With the System time zone parameter choose the locally valid time zone from a list.
The deviation from the GMT (Greenwich Mean Time) must be indicated.
Parameter Remarks
User The number is defined in the numbering plan.
Function codes Legend
Set up the system time *57 hh mm hh = hour <00...23>
mm = minute <00...59>
Set up the system date *58 dd mm yyyy dd = day <00...31>
mm= month <00...12>
yyyy = year <1980...2999>
To Next Page
Loading...
