Features overview
498
System functions and features as of R4.1
syd-0570/1.2 – R4.1 – 08.2016
user group is busy (all members busy) call waiting is automatically signalled to the
first member.
• The patient can also be an external user. In this case his call is routed to the hotline
destination via a DDI number.
• On the Mitel Alarm Server all the patients must be configured as endpoints and as-
signed to a room. The nursing staff must be configured as endpoints and as a hot-
line. Only then can the Mitel Alarm Server monitor the connections via CSTA inter-
face and respond accordingly in the event of a hotline call.
Note:
If the hotline destination is busy and if call waiting is not possible (e.g. because call waiting is
already being signalled), the Mitel Alarm Server will be unable to detect the call and therefore
unable to respond to it. This needs to be taken into account when drawing up the alarming con-
cept.
See also:
A separate system manual is available for the installation and configuration of Mitel Alarm
Server.
9. 11. 3. 6 Interface descriptions
The ATAS and ATASpro protocols can be disclosed to interested manufacturers of
messaging, monitoring and alarm equipment on request.
10 Features overview
The features overview was edited and extended and is now available as specific docu-
ment for downloading.
Tab. 331 Links to features overview
Deutsch English Français Italiano Español
Features overview syd-0594 syd-0595 syd-0596 syd-0597 syd-0598
To Next Page
Loading...
