Features
425
System functions and features as of R4.1
syd-0570/1.2 – R4.1 – 08.2016
Reference to Other Features
"Making calls with your own settings on a third-party phone", page 425
"Private calls with PIN", page 426
9. 6. 21 Making calls with your own settings on a third-party
phone
This feature allows the authorized internal user to use a third-party terminal with his
own valid PIN to make a single call with the following personal settings:
• Internal and external digit barring settings
• Charge counters
• CLIP display
Detailed Description
After function code #36, the user dials his own internal user number and his personal
PIN. This activates his digit barring settings and the call charges are charged to his
charge counter: The called party sees the caller's user number and not the number of
the terminal being used by the caller.
For reasons of data protection no entry is made in the redial register.
This same function is also used to unlock locked terminals to make a single call. For
more details on this feature and how to set the PIN, see "Unlocking the terminal for
each call", page 423.
Once the function has been activated, the user has the possibility to redial within 12
seconds without going on-hook; alternatively he can go on-hook and then dial within 60
seconds using prefix dialling.
In both cases operation is subject to the following restrictions:
• The terminal settings cannot be altered.
• The private phone book of the terminal’s user cannot be used.
• Dialling by name is not possible.
Once the call is completed, the terminal returns to its normal mode, i.e. the terminal's
digit barring settings are reactivated.
• External digit barring (used by phone lock) Definition of external dialling possibilities in the locked state
User configuration of the unlocking user:
PIN
1)
• Changes the PIN (must not be "0000").
• PIN syntax (all terminals): 2 to 10 digits, digits 0 to 9
1)
Setting also possible withOffice 45
Parameter Remarks
To Next Page
Loading...
