Features
345
System functions and features as of R4.1
syd-0570/1.2 – R4.1 – 08.2016
• If a user who is in a user group along with other users rejects a call, the other users
continue to ring (unless Default call forwarding if rejected is configured, see section
below). If all the UG members reject the call, the call set-up is cleared down and the
calling user obtains the busy tone.
• For each user a Default call forwarded if rejected can be configured separately for
internal and external calls. Possible redirection destinations include internal or ex-
ternal users, PISN users, abbreviated dialling numbers, user groups, CDE call num-
bers, etc. This means the response if the call is rejected can vary according to the
call’s origin, e.g. voice mail for internal calls and transfer for external calls (see "De-
fault call forwarding per user", page 178).
Functions during the ringing phase
Tab. 141 Rejecting a call: Function
System configuration
No settings
Reference to Other Features
"Call Forwarding Unconditional (CFU)", page 333
"Call Forwarding on No Reply (CFNR)", page 340
"Call waiting", page 388
"Deflecting a call during the ringing phase (CD)", page 342
9. 4. 6 Twin Mode / Twin Comfort
Twin Mode and Twin Comfort are used to couple a user's desk phone and DECT
phone.
Fig. 192 Twin Mode / Twin Comfort
Twin Mode automatically activates a Call Forwarding Unconditional from user B to user
C as soon as the cordless phone (user C) is removed from the charging bay. Con-
versely, a call for C is automatically diverted to B if C is in the charging bay.
Function System phones (without Office 10)
Rejecting a call during the ringing phase
$
%
&
$
%
&
KD]DD[[E
To Next Page
Loading...
