Mitel 430 - Features

Features
478
System functions and features as of R4.1
syd-0570/1.2 – R4.1 – 08.2016
9. 9. 1 Features
The features are designed to implement a user-friendly accommodation and hotel solu-
tion. This solution is also ideally suited for the management of care homes and retire-
ment homes.
The following features are covered:
• Check-in/Check-out
• Automatically executable functions at Check-in (e.g. delete guest data) and Check-
out (e.g. print bill).
• Barring room-to-room traffic
• Display and management of the room status
• Assignable permission sets depending on room status
• Cleaning status of rooms with maintenance notices
• Wake-up service and notification service
• Set up a hotline and a surcharge calculator for each room
• Print and reset call charges
• Editable HTML and TXT templates for call charge invoices
• Monthly invoice for call charge invoices by e-mail
• General settings with WebAdmin
• */# function code for the maintenance staff to change the room status, leave mainte-
nance notices or book out minibar items.
• Supports specific functions on Mitel 6710 Analogue and Mitel 6730 Analogue ana-
logue phones, on Mitel SIP phones and on digital system phones (see table below).
• Supports an additional lock partiality on MiVoice 5300 / 5300 IP system phones.
Locking locks all menus and settings, except call lists, voice mail input and local
phone book.
Tab. 319 Features on room phones
Feature
Mitel 6710
Analogue
Mitel 6730
Analogue
MiVoice 5300
series
Mitel 6700 SIP
/ 6800 SIP SIP
series
Other ana-
logue
phones
Message waiting indication (MWI) ✓
1)
✓
1)
✓✓✓
2)
Delete call lists ✓
3)
✓✓ ✓ –
Delete phone book –
✓✓ ✓ –
Set display language –
✓✓ ✓ –
Set date and time –
✓✓ ✓ –
Switch key lock on/off
✓✓ ✓ ✓ –
Configure/delete keys
✓✓ ✓ ✓ –