Features
333
System functions and features as of R4.1
syd-0570/1.2 – R4.1 – 08.2016
Functions in prefix dialling
Tab. 129 Functions
System configuration
In the user list ( =th) click on the user you want then navigate to the section Ab-
sence and personal call routing. You can define and also activate personal call routing
there. More information can be found in the online help.
Reference to Other Features
"Organising absences on the workstation", page 351
9. 4 Call Forwarding Unconditional functions
9. 4. 1 Call Forwarding Unconditional (CFU)
Calls intended for B are diverted to destination C.
Fig. 184 Call forwarding
Call Forwarding Unconditional responds differently depending on the System Configu-
ration and the function code used. The various CFU types are as follows:
• CFU to a variable destination:
The user specifies the chosen call forwarding destination on his terminal. This CFU
can be either unconditional or only if busy.
• Preconfigured CFU:
The call forwarding is made unconditionally to a destination entered in the user con-
figuration. This destination is also used with the Leave message feature if the caller
is unable to read messages on his terminal.
Functions Function codes Remarks
Activate personal call routing *45 <Call routing 0...5> The default setting is 0 (call all ter-
minals).
Deactivate personal call routing #45 #45
Activate Ring Alone *41
Deactivate Ring Alone #41
$
%
KD]DD[[E
To Next Page
Loading...
