Features
433
System functions and features as of R4.1
syd-0570/1.2 – R4.1 – 08.2016
content *88 <other user No.> is assigned to the key, all three possibilities described
above will also be available on the DECT headset at the touch of a button. If a user
has been assigned several terminals, the same can of course also be carried out
with the personal terminals using *88 <own user No.>
• An external or internal call is to be forwarded by someone who does not know how
to transfer a call (for instance a child). It is now possible to take over the call from an
authorised terminal.
• A call has been forwarded to the user’s own voice mailbox. This call can now be
taken with Fast Take.
• The quality on a cordless phone is poor. Instead of transferring the call, it can be
taken directly by a desk phone.
Default settings
In the default setting, users do not have Fast Take authorization and are protected
against Fast Take.
Note:
With TWIN users the protection against Fast Take is always inactive on both sides, regardless
of the configured setting.
Reference to Other Features
"Acceptance of a call or data connection:", page 428
"Take (taking a call)", page 430
"Picking up a call", page 404
9. 6. 27 Room monitoring (Baby surveillance)
This feature is designed specifically for monitoring infants. A cordless system phone
(Office 135, Mitel 600 DECT) is switched to a special monitoring mode and coupled
with an internal or an external destination number.
If noise levels in the area surrounding monitoring phone A exceed a specific value, a
call is automatically triggered to the configured destination B. When the destination
user answers the call, the (one-way or two-way) connection is switched through. This
is referred to as active room monitoring.
It is also possible to make a check call to the monitoring phone A. Without the call be-
ing signalled acoustically, A automatically answers the call and switches a (one-way or
two-way) call connection through. This is referred to as passive room monitoring.
To Next Page
Loading...
