Features
432
System functions and features as of R4.1
syd-0570/1.2 – R4.1 – 08.2016
Fig. 234 Pick up a call with Fast Take
Detailed Description
Tab. 259 Fast Take
Function in prefix dialling
Tab. 260 Accept a call: Function
System configuration
Tab. 261 Taking over an active connection: System configuration
Application example
• DECT headsets logged on to the communication server as GAP cordless terminals
usually have only one key (for seizing a call and hanging up). If a hotline with the
End point
Operating sequence / signalling on the
terminal
Scope
C *88 <User No. B> Requirement:
•The Fast Take authorization must be enabled.
Valid for:
• Calls to internals users, UG, CDE
•Recall
• Announcement
• Simple connections with internal users or a user’s own
voice mailbox
Restrictions:
• Call to line key, appointment reminder call, recall
• Conference participants, users on hold, etc.
B User B obtains the busy tone once C has
taken the connection to A.
Requirement:
• Fast Take protection not activated
Possible interfaces:
• Internal
Function Function code
Pick up a call *88 <User No.>
Parameter Remarks
Prepare call takeover / Fast Take User C's permission set
Note: This parameter also regulates the permission to prepare
call acceptance (see page 428
)
Fast Take Protection User B's user configuration
To Next Page
Loading...
