Mitel 430 - Mitel Mobile Client; Mitel Mobile Client Controller

Numbering plan
64
System functions and features as of R4.1
syd-0570/1.2 – R4.1 – 08.2016
System configuration
The mobile/external phones are configured with the mobile/external terminal interface
settings. The navigation code =32 opens the first terminal of this type in the terminal
list. Refer to the online help for information on the individual settings.
Note:
In the case of an external call to an integrated mobile/external phone the caller’s CLIP is always
transmitted to the phone as redirecting information. This also applies to external calls to a user
who has redirected to an integrated phone. In this case the parameter Send redirecting informa-
tion must be activated in the trunk group settings and "Special Arrangement" must be activated
by the network provider.
See also:
A separate User’s Guide is available for the mobile phones on MiVoice Office 400. It includes
an overview of the functions that can be carried out using mobile phones.
3. 2. 5. 3 Mitel Mobile Client / Mitel Mobile Client Controller
Mitel Mobile Client 4 is an application for the most common Smartphones with An-
droid, iOS and BlackBerry operating systems. The most important telephony functions
are thus available via the menu, and the mobile phone user can move about freely be-
tween the WLAN and mobile network without the call being interrupted (seamless
handover).
The server-based Mitel Mobile Client Controller, connected to the communication sys-
tem via SIP, is required for integration into the communication system. As a configura-
tion and administration interface, it offers web-based management software. However,
Mitel Mobile Client Controller and Mitel Mobile Client 4 are normally configured auto-
matically via WebAdmin.
Dual mode (GSM/ WLAN), address book search, quick call setup, Voice over IP and
"trueCLIP" are possible using the 2G/3G data channel between Mitel Mobile Client 4
and Mitel Mobile Client Controller. Mitel Mobile Client Controller is connected to the in-
ternet; therefore, a direct internet connection is not required for the communication
system.
Each Mitel Mobile Client 4 requires one MMC Extension licence.
See also:
With Mitel Mobile Client 4, a user's guide and and an administration manual are available for
each operating system.