Features
400
System functions and features as of R4.1
syd-0570/1.2 – R4.1 – 08.2016
9. 6. 9 Duplex mode
Duplex mode is a special of announcement whereby the called system phone B imme-
diately transform A’s announcement into an internal call.
Fig. 216 Duplex mode
Detailed Description
Tab. 209 Duplex mode
In duplex mode the connection setup is the same as for an ordinary announcement
made to a user. If the user has several phones on which the automatic hands-free facil-
ity is activated, any phone (the quickest) will answer the call. The same applies to inter-
com to an announcement group.
Function in prefix dialling
Tab. 210 Duplex mode: Functions
End point Operating sequence / signalling on the terminal Scope
A Activates announcement in prefix dialling or suffix
dialling
Requirement:
• A is authorized to make announcements
• Suffix dialling with system phones only
B The announcement is signalled by a warning tone (3
short signal tones). The call connection is then
switched through (loudspeaker and microphone
active).
Possible interfaces:
Internal only:
•User
Requirement:
• The system phone supports automatic
announcement (Office 35, Office 45,
MiVoice 5370, MiVoice 5380,
Mitel 600 DECT, Mitel 6700 SIP /
6800 SIP) and B has allowed announce-
ment to his own set
Function Function code System phones
Intercom to one user with phone *7998 <User No.> # •
1)
• Office 35, Office 45, MiVoice 5370,
MiVoice 5380: double-click team key
1)
Also possible in suffix dialling
Setting on the destination phone • Office 35, Office 45, MiVoice 5370,
MiVoice 5380, Mitel 6700 SIP / 6800 SIP: Auto-
matic hands-free on Announcement or On
•Mitel600DECT: Hands-free for announcement
activated
To Next Page
Loading...
