Numbering plan
56
System functions and features as of R4.1
syd-0570/1.2 – R4.1 – 08.2016
Fig. 23 Levels as per PNP definition
3. 2 The System's Numbering Plan
The system's internal numbering plan is the numbering plan used for a stand-alone
communication server or a PINX in a private network. The numbers entered in the
numbering plan are used both to dial up call destinations in the communication server
and to execute control functions. Call destinations and functions are grouped into cate-
gories.
The internal numbering plan:
• Assigns number ranges to the categories.
• Allocates their numbers to call destinations and control functions, making them ob-
tainable and executable respectively.
As far as the call destination numbers are concerned, the system's numbering plan is a
PNP-type numbering plan.
-FWFM
-FWFM
-FWFM
-FWFM
-FWFM
To Next Page
Loading...
