Features
427
System functions and features as of R4.1
syd-0570/1.2 – R4.1 – 08.2016
• Unlike with #36 (making calls with your own settings but on a third-party phone) you
cannot hang up after activating the function and then prefix dial within 60 seconds.
• The same PIN is used as for the phone lock.
• Users without their own terminals can be defined as virtual users, and can then also
use this feature.
Conditions in the system configuration:
• For this feature to be used, the default PIN must be changed first (see "Locking / un-
locking terminals (telephone lock)", page 422 for the syntax).
• A private exchange access must not be defined or the private exchange access pre-
fix must be barred for all users using internal digit barring.
Note:
#46 temporarily bypasses any exchange access barring and the external digit barring of the
user identified by means of his user number and PIN.
Reference to Other Features
"Making calls with your own settings on a third-party phone", page 425
"Unlocking the terminal for each call", page 423
9. 6. 23 Appointment call
Each user can configure one individual appointment reminder call and one permanent
appointment reminder call, which are then stored in the system.
Fig. 230 Appointment call
Detailed Description
Tab. 250 Appointment call
Individual call orders are executed only once over the next 24 hours.
The appointment reminder call is not forwarded if CFU, CFNR or Do not disturb is acti-
vated.
End point Operating sequence / signalling on the terminal
A • Once the function has been executed, A obtains the acknowledgement
tone.
• If the appointment time is reached, the terminal will ring for 1 minute.
To Next Page
Loading...
