EasyManua.ls Logo

Mitel 430 - Variable and Preconfigured Conference

Mitel 430
502 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Features
360
System functions and features as of R4.1
syd-0570/1.2 – R4.1 – 08.2016
Notes
Conference participants hear an attention tone when they join the conference. This tone can
be switch off on the entire system. Comply with the national data protection terms. With a
three-party conference in the public exchange, the signalling depends on the network pro-
vider.
Conferences take up hardware resources.
On SIP phones of the Mitel 6700 SIP / 6800 SIP series, the Mitel BluStar 8000i and a num-
ber of standard SIP phones, three-party conferences are possible locally on the phone. For
this, the number of line keys in the terminal configuration must be at least 2 and the param-
eter Conference circuit = In phone.
9. 5. 5. 1 Variable and preconfigured conference
A can set up a conference with B, C and D in prefix dialling.
Fig. 200 Variable and preconfigured conference
Tab. 163 Variable and preconfigured conference
End point Operating sequence / signalling on terminal Scope
A The conference leader hears a ring-back tone when set-
ting up the conference.
B, C, D The preconfigured or dialled conference participants hear
ringing signalling during the conference setup and during
the conference - depending on the system configura-
tion
1)
:
no tone at all
the conference tone only once
the conference tone regularly
The conference and, depending on system phone type,
the number of conference participants or call num-
bers/names are displayed on the phone screen.
1)
With three-party conference in the public exchange, the signalling depends on the network provider.
Possible interfaces:
internal, external
2)
3)
, PISN
4)
Restrictions:
Three conference participants (up to a
maximum of 6) are permitted per confer-
ence
5)
.
Abbreviated-dialling numbers are not
permitted
2)
If more than one external user is to be switched into a conference, the settings authorising exchange-to-ex-
change traffic need to be observed (see "Exchange-to-Exchange Connections", page 224
).
3)
With three-party conference in the public exchange, only external interfaces are possible.
4)
The settings authorising exchange-to-exchange traffic need to be observed for PISN users in the public net-
work or on a virtually networked PINX (see "Exchange-to-Exchange Connections", page 224
).
5)
Only three conference participants are permitted if three-party conference in the public exchange is activated.
&
%
$
'
KD]DD[[F

Table of Contents

Other manuals for Mitel 430

Related product manuals