Features
457
System functions and features as of R4.1
syd-0570/1.2 – R4.1 – 08.2016
9. 7. 9 User group: Logging in and logging out
Members of user groups can log themselves out and back in again. The logout and
login procedure can apply simultaneously for all the user groups or specifically for one
user group only.
Detailed Description
Tab. 288 User group
If a member activates a CFU to an external destination, a PISN user or voice mail, he
may automatically be logged out. The response depends on the configuration (see
section "Call Forwarding Unconditional (CFU) for user group members", page 137
).
With user groups configured as "large", the UG member is logged out for all types of
redirected calls, even internal ones.
The "Clear configuration" feature (*00 or #00) does not affect the logging in/out of UG
members.
Functions in prefix dialling
Tab. 289 User group: Functions
It is also possible to view the status of UG members and log in / log out UG members
via WebAdmin:
• Logged in status = (log out with a click on the symbol)
• Logged out status = (log in with a click on the symbol)
End point Operating sequence / signalling on the terminal Scope
A • When logging in or out, A obtains an acknowl-
edgement tone in each case.
• If the function is configured on a key with LED dis-
play, the status logged out/in will be displayed.
Requirement:
• A is member of one or several user groups
Restriction:
• The last remaining member of a user group
cannot log himself out.
• Does not apply to operator console and gen-
eral bell
Functions Function codes
Log in to all user groups *48 00
Log out of all user groups #48 00
Log into one user group *48 <UG No.>
Log out of one user group #48 <UG No.>
To Next Page
Loading...
