Mitel 430 - Page 456

Features
456
System functions and features as of R4.1
syd-0570/1.2 – R4.1 – 08.2016
Tab. 285 Record malicious call (MCID)
Tab. 286 Record malicious calls (MCID) Prerequisites
Suffix dialling function
Tab. 287 Record malicious calls (MCID) Suffix dialling function
System configuration
No settings
Reference to Other Features
"Identification elements", page 71
End point Operating sequence / signalling on terminal Scope
B Activate during the call / after the call during the busy
tone signalling
1)
.
Network provider confirms activation (the type of sig-
nalling is specific to the network provider)
1)
The duration of the busy tone signalling after the call depends on the network provider.
Internal user
Connection restrictions:
• Only for external incoming connections
• In hands-free mode, activation is practically
possible only during the call as system
phones hang up automatically within a few
seconds of the end of the call.
A External user
Prerequisites Communication server
Technical The communication server must be directly connected with the ISDN network (no support in
the private network)
Terminals:
• System phones (configurable only with WebAdmin on the Office 10)
• ISDN terminals
Administrative Must be applied for as a supplementary service from the network provider
Legal A court injunction must be required depending on the legislation in the region concerned
Function System phones ISDN terminal
Activate MCID Record malicious calls (MCID) is available in the func-
tion selection list, and can be configured onto a function
key.
Menu or function key