Call logging (CL)
312
System functions and features as of R4.1
syd-0570/1.2 – R4.1 – 08.2016
Example of PC2 format
Fig. 177 CL output with PC2
8. 7. 7. 3 PC3 format
The PC3 format has been expanded to include the fields TTA (Time to answer) and
Seq. (Sequence). However, these fields are relevant only to incoming traffic.
Serial number llll 00 -| 4 87
Carriage Return CR 1 91
Line Feed LF 1 92
1)
The primary channel group is output in position "c", the trunk card number in position "bb" and the network in-
terface number in position "pp" (see example on page 312
).
2)
This is the direct dial number that is displayed as the CLIP to an external call partner.
3)
If Data protection is configured, the last 4 digits of the number are replaced by the space character "SP".
Data field, meaning Structure Format Length Offset
X
31342 21168 10 970416 15:20 00H03M45 01002 34 00019 004988223211 0678
33031 90 970417 08:18 00H04M20 00201 00010 065243024 0679
OIP
PC1
PC2
PC3
PC4
PC5
Protocol
Bill
Cost centre number
DDI No.
Data in PC mode
(YYMMDD)
Dialled numbersCall dura-
tion
Trunk connections
Time
Sort character
Serial number
Number of metering pulses
Internal user number
CL output
To Next Page
Loading...
