Mitel 430 - Conference

Features
359
System functions and features as of R4.1
syd-0570/1.2 – R4.1 – 08.2016
Brokering is also possible from a conference to a user.
Suffix dialling function
Tab. 161 Brokering (switching back and forth between two calls): Function
System configuration
Tab. 162 Brokering: System configuration
Reference to Other Features
"Hold (enquiry call)", page 356
"Enquiry call with return to initial call", page 357
"Three-party conference from an enquiry call", page 362
"Call transfer (switching)", page 366
9. 5. 5 Conference
User A can set up or prepare a conference call with several users. This can be done in
four different ways:
• Variable conference: Here the conference participants are all listed in the same dial-
ling string and are all called up at the same time.
• Preconfigured conference: Here the conference participants are preconfigured in
the system configuration and are all called up at the same time.
• Three-party conference (conference from enquiry call): The conference is set up
one participant at a time. The participants in the conference are called one after the
other and connected individually (see "Three-party conference from an enquiry call",
page 362).
• Conference bridge: The conference participants choose a specific call number and
are connected with the conference after entering a PIN (see "Conference bridge",
page 363).
1)
With hold in the public exchange, the signalling depends on the network provider.
Function System phones Analogue terminal
Brokering •
• With digit suffix dialling: 2
R2 (R = control key)
Parameter Remarks
Hold in the exchange • Trunk group configuration
• Local feature does not require any setting
Music on hold see "Music on hold", page 353