EasyManua.ls Logo

Mitel 430 - Page 334

Mitel 430
502 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Features
334
System functions and features as of R4.1
syd-0570/1.2 – R4.1 – 08.2016
CFU if unobtainable:
The user configuration can specify where a call should be routed if a terminal is un-
obtainable. Different destinations can be configured depending on the reason for
the unavailability and the call’s origin (see "Response if unobtainable", page 186
)
Note:
An existing call forwarding is overwritten by a new call forwarding. CFU Unconditional, CFB
and Call Forwarding on No Reply (see page 340) are equivalent.
Detailed Description
Tab. 130 Call forwarding
Note:
The internal number of a call distribution element can only be used as the destination for a CFU
in a special case, namely if at least one CDE destination is configured on ACD. If not, Not avail-
able is displayed whenever the function is activated. Any configured CDE destinations that are
not ACD are never executed.
Call forwarding chains:
Internal: CFU chains can be set up locally (maximum 20);
In the PISN: CFU chains are permitted. They are however restricted by the transit
counter.
Note:
The function code *67 (CFB) and *61 (Call Forwarding on No Reply) interrupts a chain of
call forwarding (*67 or *61 is no longer carried out).
End point Operating sequence / signalling on the terminal Scope
B Obtains acknowledgement tone when activating
and resetting the CFU
If First call if call forwarding unconditional is active
is activated and C is an internal user, B obtains an
attention tone (short ring) and has 5 seconds in
which to answer the call.
Restriction:
B can only activate a single call forwarding
unconditional. Each new one overwrites the old
one.
C Possible destinations:
User: internal, external
1)
, PISN
2)
Coded ringing
UG: 17 to 21 (Mitel 415/430) or 25 to 29
(Mitel 470) and user groups configured as
"large".
Standard text (leave message)
Requirement:
C is not protected against Call Forwarding
Unconditional (*02).
1)
see "Call Forwarding Unconditional to exchange", page 336.
2)
The conditions for Call Forwarding Unconditional to exchange apply to PISN users in the public network or
on a virtually connected PINX.

Table of Contents

Other manuals for Mitel 430

Related product manuals