Features
335
System functions and features as of R4.1
syd-0570/1.2 – R4.1 – 08.2016
Call forwarding loops:
• Internal: not enabled:
• In the PISN: restricted by the transit counter.
C is the only user who can still reach B.
Functions in prefix dialling
Tab. 131 Call Forwarding Unconditional: Functions
System configuration
Tab. 132 Call Forwarding Unconditional: System configuration
Reference to Other Features
"Leave message", page 410
"Follow me", page 339
"Call Forwarding on No Reply (CFNR)", page 340
Function codes
Activate CFU / CFB to any user No. *21 <Destination No.> / *67 <Des-
tination No.>
Activate CFU / CFB to user last configured *21 # / *67 #
Clear CFU / CFB #21 / #67
Activate preconfigured CFU *22
Clear preconfigured CFU #22
Activate CFU to text message *24 <text No.> [param.] #
Delete CFU to text message #24
Activate CFU to general bell (coded ringing) *28
Clear CFU to general bell (coded ringing) #28
Protect (own set) against CFU *02
Allow CFU (to own set) #02
Parameter Remarks
Predefined CFU User configuration
First call if call forwarding unconditional is active User's permission set
Call forwarding type User configuration
Call forwarding destination User configuration
Partial Rerouting (PARE) User's permission set
Partial Rerouting (PARE) Trunk group configuration
Wait for connection General exchange settings (see also "Call Forwarding
Unconditional to exchange", page 336)
Last mailbox when forwarded User configuration (see also "Response to call forwarding
chains", page 381)
To Next Page
Loading...
