Mitel 430 - Page 19

Product and Safety Information
19
System functions and features as of R4.1
syd-0570/1.2 – R4.1 – 08.2016
Hazard alert messages
Special hazard alert messages with pictograms are used to signal areas of particular
risk to people or equipment.
Hazard:
Failure to observe information identified in this way can put people and hardware at risk through
electrical shock or short-circuits respectively.
Warning:
Failure to observe information identified in this way can cause a defect of the product or to a
module.
Note:
Failure to observe information identified in this way can lead to equipment faults or malfunctions
or affect the performance of the system.
General Considerations
Special symbols for additional information and document references.
Note
Failure to observe information identified in this way can lead to equipment faults or malfunctions
or affect the performance of the system.
Tip
Additional information on the handling or alternative operation of equipment.
See also
Reference to other chapters within the document or to other documents.
Mitel Advanced Intelligent Network
Particularities that have to be observed in an AIN.
References to the MiVoice Office 400 configuration tool WebAdmin
If an equals sign is entered in the WebAdmin search window , followed
by a two-digit navigation code, the view assigned to the code is directly displayed.
Example: Licence overview ( =q9) view
The corresponding navigation code is available on the help page of a view.