Mitel 430 - Page 165

Call routing
165
System functions and features as of R4.1
syd-0570/1.2 – R4.1 – 08.2016
Example Switzerland:
[1] The call is routed to external if no entry is found for the dialled number in the allocation table.
[2] The call is routed to the internal destination which is assigned in the allocation table of the dialled external number.
Fig. 81 Routing to an internal destination via the allocation table
Configuration:
• Regions – Country code: 41
• Numbering plan – Exchange access, business: 0
• Entry in the allocation table:
– External call number: +41326553867
– Internal call number: 3867
A call to the following phone numbers is routed to internal destination 3867:
• 00326553867
• 00041326553867
Note:
Instead of Exchange access business, the digits for Exchange access private, Cost
centre selection or Route selection can also be used.
Restrictions:
• Dialling from analogue terminals is not possible.
• Dialling from the system phone, ISDN terminal, SIP terminal or PISN user must be
done using bloc dialling. En-bloc means that the complete number is sent to the
communication server in one go. This is the case when dialling from a memory (call
list, repeat dial register, phone book etc.) or with call preparation via the keypad.
[2]
[1]
+41326553867
00041326553867
00326553867
3867
2355
Communication
server
Allocation
table