Call routing
197
System functions and features as of R4.1
syd-0570/1.2 – R4.1 – 08.2016
The call charges are logged (among others) on the counter for the selected cost
centre.
• Route selection:
The call is routed via the route selected by means of a prefix.
The call charges are logged under Business on the user counter (among others).
Dialling an abbreviated dialling Number
With an abbreviated dialling number dials the stored phone number. The phone num-
ber must have an exchange access prefix.
The digit barring facilities are bypassed. If the call destination for an abbreviated dial-
ling is to be barred using digit barring, the abbreviated dialling number must be entered
in the internal digit barring.
The call is routed via the user’s route, provided the stored phone number does not al-
ready have a prefix for exchange access with route selection.
The call charges are logged in accordance with the user configuration, provided the
stored number does not already have an exchange access prefix that regulates call
charge logging (e.g. Exchange access, private).
A name can be stored with each abbreviated dialling number, thereby also enabling
name dialling.
Mitel Advanced Intelligent Network:
In an AIN with nodes in different countries the abbreviated dialling numbers must always
include the international prefix (e.g. 00) and the country code (e.g. 41).
(Example: 0-0041326553333). This is necessary as the national portion of the number may well
be identical in different countries. This prevents conflicts in the call routing and call number dis-
play (CLIP).
To Next Page
Loading...
