Features
403
System functions and features as of R4.1
syd-0570/1.2 – R4.1 – 08.2016
Detailed Description
User B: Charge recall can only be activated from system phones with a display.
User A: At the end of the call, the user’s exchange access is automatically barred
again.
With the general charge settings ( =b4) a time can be configured for both standard
and phone booth connections by which a charge recall is delayed when the handset
goes on-hook. This means that more than one exchange call can be made before the
charge recall is effected. If the configured time is greater than zero, the internal user
automatically obtains the exchange-free signal when he picks up the handset again
and is able to dial a new number directly. If the user does not pick up the handset
within the time delay, a charge recall is effected.
Tip:
Store charge recall (*32 user No.) under a function key.
Function in prefix dialling
Tab. 212 Charge recall: Function
System configuration
Tab. 213 Charge recall: System configuration
Reference to Other Features
"Setting up phone booths", page 484
Function Function code
Activate charge recall *32 <User No.>
Parameter Remarks
Charge recall standard (s) General charge settings
Charge recall phone booth (s) General charge settings
To Next Page
Loading...
