Mitel 430 - Page 429

Features
429
System functions and features as of R4.1
syd-0570/1.2 – R4.1 – 08.2016
Detailed Description
Tab. 252 Preparing to take over an active connection
Application Example
At three football grounds reporters are reporting the matches. Depending on the state
of play, the broadcast director may want to make the connection available to one of the
reporters.
The director can use the preconfigured keys on a terminal to prepare to take over the
connections. All the moderator at the broadcast studio has to do is pick up the handset
on his terminal (to which a hotline has been allocated with *88#) and he is immediately
connected with the football ground. While he is talking, the director can prepare the
connection for the next reporter, and so on.
Functions in prefix dialling
Tab. 253 Preparing to take over an active connection: Functions
System configuration
Tab. 254 Preparing to take over an active connection: System configuration
End point Operating sequence / signalling on the terminal Scope
B User B obtains the busy tone once C has taken the con-
nection to A.
Possible interfaces:
Internal
C Possible interfaces:
Internal
D After preparing to take over the call or taking back the
preparations for taking over the call, D obtains the
acknowledgement tone.
Requirement:
Authorization is enabled in the user config-
uration. This authorization can be set sepa-
rately for call and data connections.
Functions Function codes
Preparations for taking over a call or a data connection from user B
to user C
*87 B*C# (call) or with *84 B*C# (data connec-
tion)
Clearing the preparations for taking over a call or a data connection
from user B to user C
#87 C (call) or with #84C (data connection)
Parameter Remarks
Prepare call takeover / Fast Take User D's permission set
Note: This parameter also regulates the permission
for Fast Take (see page 431
)
Prepare data transfer User D's permission set