Features
436
System functions and features as of R4.1
syd-0570/1.2 – R4.1 – 08.2016
• Digit 2: Two-way call connection (modus 2)
• Digit 5: Cancelling the time limit on the call connection.
The mode switchover and time limit cancellation apply to this connection only. Thereaf-
ter both the mode of the originally selected function and the time limits are reactivated.
Actively terminating the call connection
Besides automatically terminating the call after 1 minute, both the destination user and
the user at the monitoring phone can prematurely terminate the call connection. In all
cases the room monitoring microphone is reactivated after a delay of 1 minute.
Calls during active room monitoring
If an internal or external user calls the monitoring phone, the handset signals the call
only visually, not acoustically. The call can be answered on the monitoring phone in
the usual way. The monitoring phone can also be used to make an outgoing call. Once
the call has been cleared down, the monitoring phone switches back to monitoring
mode without delay.
If the destination user calls the monitoring phone, the phone temporarily switches to
passive room monitoring (see next chapter).
Tips:
– Room monitoring is inactive while the monitoring phone is ringing. This gap in monitoring
can be prevented by activating call forwarding on the monitoring phone. The destination
user can still make a verification call as call forwarding does not apply to him.
– In each case the room monitoring microphone is reactivated after the delay times. This is
indicated by the flashing exclamation mark on the display of the monitoring phone.
Notes:
– Room monitoring based on DECT technology cannot be 100% reliable.
– Extraneous noises in the monitored room call lead to false calls.
– Therefore no liability can be assumed for failed monitoring calls or for false calls.
To Next Page
Loading...
