Features
483
System functions and features as of R4.1
syd-0570/1.2 – R4.1 – 08.2016
a call is triggered or he is connected with the voice mail system so he can listen to his
voice message.
Tab. 324 Notification service: Function
Note:
This function code is also used for "ordinary" users that have not been created as room guests
(see "Message function", page 408). In an accommodation and hotel environment, however,
the way in which the notification is triggered and the response to the answer are handled differ-
ently.
Tip:
Store function code under a key.
Wake-up service
The function codes for the wake-up service are identical to those of the appointment
reminder call (see "Appointment call", page 427
).
In an accommodation and hotel environment, however, a number of additional settings
can also be configured, e.g. the type of wake-up announcement and the amount of
time during which the wake-up call remains active if the guest phone is busy. If the
wake-up call is not activated on the guest phone itself, it can also be carried out on an-
other internal phone using remote control (*06).
Secret code
The secret code feature (*34) allows barred room-to-room traffic and internal digit bar-
ring to be bypassed. If *34 is barred in the internal digit barring, "secret code" cannot
be activated. The room-to-room configuration applies exclusively.
The secret code allows key hotel management staff for example to make calls to other-
wise barred users. If the secret code is disclosed to a group of guests, room-to-room
traffic can also be enabled.
Note: This feature is not described in any of the operating instructions.
User event message
The USER EVENT MESSAGE can be generated from any internal terminal using the
command *77 [nnnn]. The parameter nnnn is optional and has a value range from
0000 to 9999. Various control and messaging functions can be implemented in this
way along with a connected application.
Functions Function codes
Answer notification *#38
To Next Page
Loading...
